Appendix A
HMI Function Reference
©
National Instruments Corporation
A-75
Get Group List
Use the Get Group List VI to returns a list of all configured groups in the system. By default,
this VI includes the
<ALL>
group in the list.
include <ALL> (T) determines whether the
<ALL>
group should be
included in the list. The default is TRUE.
error in (no error) is a cluster that describes the error status before this VI
executes. For more information about this control, see the section
Not Reported by the BridgeVIEW Engine
in this appendix.
group list is the list of currently configured groups.
no
.scf
loaded is TRUE if there is no .
scf
file currently loaded in the
system.
error out is a cluster that describes the error status after this VI executes.
For more information about this indicator, see the section
Reported by the BridgeVIEW Engine
in this appendix.
