Chapter 10
Customizing VIs
10-2
©
National Instruments Corporation
calling VI), and choosing SubVI Node Setup…. The following illustration
shows the SubVI Node Setup dialog box.
Note
If you select an option from the VI Setup… dialog box of a VI, the option applies
to every instance of that VI. If you select an option from the SubVI Node Setup
dialog box, the option applies only to that particular node.
Activity 10-1.Use Setup Options for a SubVI
Your objective is to build a VI that prompts the operator to enter
information.
You will create a VI that launches a dialog box to obtain information from
the user upon execution. Once the user enters the information and presses
a button, the dialog box disappears.
Front Panel
1.
Open a new front panel and place some string controls and a button, as
shown in the following illustration.
