5.
Follow the instructions in the installation prompts.
Note
Windows users may see access and security messages during
installation. Accept the prompts to complete the installation.
6.
When the installer completes, select
Restart
in the dialog box that prompts you to restart,
shut down, or restart later.
Installing the Hardware
Protection Impairment
Caution
You can impair the protection provided by the ATCA-3671 if you use it in
a manner not described in this document.
Caution
Do not operate the ATCA-3671 in a manner not specified in this
document. Product misuse can result in a hazard. You can compromise the safety
protection built into the product if the product is damaged in any way. If the product
is damaged, return it to NI for repair.
Caution
Observe all instructions and cautions in the user documentation. Using
the model in a manner not specified can damage the model and compromise the
built-in safety protection. Return damaged models to NI for repair.
Installing the RTM
Caution
Install the RTM before installing the ATCA-3671. Installing the
ATCA-3671 before installing the RTM can damage the connectors of both modules.
1.
Gently guide the module into the chassis module guides and slide the module into the
chassis until it is fully inserted.
2.
Close the module ejector handles to fully seat the module and latch it to the chassis, as
shown in the following figure.
Figure 1. Using the Ejector Handles to Install the RTM
3.
Tighten the four captive screws on the panel to secure the module.
6
|
ni.com
|
ATCA-3671 Getting Started Guide