National Instruments AT-GPIB/TNT Getting Started Download | Manualshive

Page: 18 / 64

background image

©

National Instruments Corporation

2-1

AT-GPIB/TNT for Windows 98/95

Chapter

2

Installation and
Configuration

This chapter describes how to install and configure the AT-GPIB/TNT
hardware and the GPIB software.

Install the GPIB Software

Before installing the hardware, complete the following steps to install
the GPIB software:

1. Insert the CD GPIB Software for Windows NT/98/95. The CD

autoplay feature automatically launches the setup wizard.

The setup wizard guides you through the necessary steps to install
the GPIB software. You can go back and change values where
appropriate by clicking on the Back button. You can exit the setup
if necessary by clicking on the Cancel button.

Note: If you do not have a CD drive and would like to order the GPIB software

on floppy disks, contact National Instruments and order part number
777780-01.

2. When the setup is complete, restart Windows.

Install the GPIB Hardware

If you have previously installed the GPIB Compatibility Release for
Windows 95/98, you should remove any system-reserved resources for
your AT-GPIB/TNT. System-reserved resources are only acquired
manually. If you did not use the Device Manager to acquire
system-reserved resources, you do not need to use the Device Manager
to remove such resources. If you do need to remove system-reserved
resources, refer to the

Removing System-Reserved Resources

section of

Troubleshooting and Common Questions

.

«
...
16
17
18
19
20
...
»

Summary of Contents for AT-GPIB/TNT

































































Reviews:

No comments

Related manuals for AT-GPIB/TNT

ShareCenter Quattro DNS-345

Brand: D-Link Pages: 40

ShareCenter Quattro DNS-345

Brand: D-Link Pages: 4

MYDLINK DNR-322L

Brand: D-Link Pages: 4

mydlink DNR-312L

Brand: D-Link Pages: 8

Brand: D-Link Pages: 16

Brand: D-Link Pages: 88

Brand: D-Link Pages: 38

Web Smart DES-1210-28P

Brand: D-Link Pages: 6

xStack Storage DSN-4000 Series

Brand: D-Link Pages: 23

Express EtherNetwork DI-604

Brand: D-Link Pages: 7

xStack Storage DSN-4000 Series

Brand: D-Link Pages: 97

Brand: CAME Pages: 4

Brand: Xinje Pages: 57

grandMA2 Series

Brand: MA lighting Pages: 36

RocketLink-G 3088/I

Brand: Patton electronics Pages: 61

Brand: Stanwax Laser Pages: 9

Brand: Waves Pages: 41

Brand: Airlink101 Pages: 46

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands