![background image](http://html1.mh-extra.com/html/national-instruments/9514/9514_getting-started_709144016.webp)
16
|
ni.com
|
Getting Started with NI 9514/16 Modules and AKD Servo Drives
Figure 12.
Axis Manager Dialog Box
3. Click
OK
to close the
Axis Manager
dialog box. The new axis is added to the
Project
Explorer
window.
Note
You cannot associate more than one axis with the same C Series module.
When you have finished these steps your LabVIEW project should look similar to the
image in Figure 13.
Figure 13.
Project Explorer Windows with Modules in Scan Interface Mode