National Instruments 6738 Calibration Procedure Download Page 1 | Manualshive

Page: 1 / 16

background image

CALIBRATION PROCEDURE

NI 6738/6739

Analog Output Devices and Modules with NI-DAQmx

This document contains the verification and adjustment procedures for the National Instruments
PCIe-6738 and PXIe-6738/6739 analog output devices and modules. For more information
about calibration solutions, visit

ni.com/calibration

.

Contents

Software.................................................................................................................................... 1
Documentation.......................................................................................................................... 2
Password................................................................................................................................... 2
Test Equipment......................................................................................................................... 3
Test Conditions......................................................................................................................... 4
Calibration Procedure ............................................................................................................... 4
Initial Setup............................................................................................................................... 5

Self-Calibration ................................................................................................................ 5
Checking Device Temperature Changes .......................................................................... 6

Verification............................................................................................................................... 7

Analog Output Verification .............................................................................................. 7
Counter Verification ......................................................................................................... 11

Adjustment................................................................................................................................ 12
EEPROM Update ..................................................................................................................... 14
Reverification ........................................................................................................................... 14
Test Limits................................................................................................................................ 15
Worldwide Support and Services ............................................................................................. 16

Software

Calibrating NI 6738/6739 devices and modules requires the installation of NI-DAQmx on the
calibration system. You must use NI-DAQmx 17.6 or later. Refer to the

NI-DAQmx Readme

to

ensure support for the device you want to calibrate. You can download NI-DAQmx from

ni.com/downloads

. NI-DAQmx supports many programming languages, including

LabVIEW, LabWindows

™

/CVI

™

, C/C++, C#, and Visual Basic .NET. When you install

NI-DAQmx, you need to only install support for the application software that you intend to use.

1
2
3
...
»

Summary of Contents for 6738

















Reviews:

No comments

Related manuals for 6738

Brand: KAR-TECH Pages: 28

Brand: DayTronic Pages: 414

Brand: Gardena Pages: 3

MME100 - Audio Micro System

Brand: Magnavox Pages: 23

Brand: hotset Pages: 2

Brand: Bticino Pages: 2

Exubera Pro UC EV9333-50

Brand: Everpure Pages: 2

Corro Wicking Bed

Brand: WaterUps Pages: 3

EduTrainer 8071407

Brand: Festo Pages: 80

Brand: Ezon Pages: 9

MICROPUMP 668-400-2

Brand: Idex Pages: 33

Brand: HEEVE Pages: 16

Brand: ROTOTILT Pages: 17

Brand: Mercury Pages: 3

PWS BEV-300 Series

Brand: Pure Water Pages: 35

Brand: XPR Access Pages: 4

Brand: Alpha Pages: 8

Brand: HIKVISION Pages: 66

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands