manualshive.com logo in svg

National Instruments 6587, Getting Started Manual, Page: 1 / 30

Share
Download
National Instruments 6587 Getting Started Manual Download Page 1

GETTING STARTED GUIDE

NI 6587

NI FlexRIO High-Speed Digital I/O Adapter Module

The NI 6587 is a 1 Gbps per channel high-speed, low-voltage differential signaling (LVDS)
adapter module designed to work in conjunction with your NI FlexRIO

™

 FPGA module. The

NI 6587 features 20 LVDS channels (16 data and 4 PFI).

This document contains installation instructions and signal information for the NI 6587R,
which is composed of an NI FlexRIO FPGA module and the NI 6587.

Note

 

Before configuring your NI 6587, you must install the appropriate software

and hardware. Refer to the getting started guide for your NI FlexRIO FPGA module
for installation instructions.

The following figure shows an example of a properly connected NI FlexRIO device.

Figure 1.

 NI FlexRIO Device

NI FlexRIO 

Adapter Module

+

=

NI FlexRIO Device

NI FlexRIO 

FPGA Module

Contents

Electromagnetic Compatibility Guidelines...............................................................................2
How to Use Your NI FlexRIO Documentation Set...................................................................3
Verifying the System Requirements..........................................................................................4
Front Panel and Connector Pinouts...........................................................................................5
Block Diagrams.........................................................................................................................7
NI 6587 Component-Level Intellectual Property (CLIP)......................................................... 9

NI 6587 CLIP..................................................................................................................10

Cables......................................................................................................................................15

Accessories......................................................................................................................16

Clocking.................................................................................................................................. 18
Installing the Application Software and Driver...................................................................... 20

Summary of Contents for 6587































Reviews:

No comments