National Flooring Equipment HB5, Service Manual

Page: 7 / 18

Safety
ELECTRICAL REGULATIONS
• Work on the electrical parts of the equipment may only be undertaken by a skilled electrician.
• All electrical parts must be inspected regularly; loose connections or scorched cables must be rectified immediately.
• Ensure that replacement electrical components comply with the original parts and are correctly adjusted if necessary. Pay special attention
to the ground fault interruptor, motor protection switch, and electronic devices.
• Working area must be sealed with red and white safety chains and a danger sign.
• Only use tools that are insulated against electrical shock.
SAFETY OFF POSITION
1. Turn off the machine.
2. Turn off the dust collector.
3. Wait for the drives to come to a complete standstill.
4. Disconnect the machine from the power source.
5. Secure against accidental start-up.
Note: Only lift or tilt the machine when it is in the safety off position.
7