Maintenance Schedule
17
WARNING:
THE BACK-UP BEEPER IS ON THE MACHINE FOR SAFETY. IT IS IMPORTANT TO KEEP IT IN GOOD WORKING CONDI-
TION. FAILURE TO DO SO COULD CAUSE BODILY INJURY.
It is recommeneded to perform initial maintenance during the break-in period when first operating the machine. After the first 100 operating
hours the hydraulic oil level should be checked and the spin-on hydraulic oil filter should be replaced, then every 200 hours thereafter. At the
500 operating hour mark the hydraulic fluid should be changed. Regular maintenance should be performed according to the schedule.
Maintenance to be performed
Interval
Daily
200 hrs 1000 hrs 2000 hrs
After initial
100 hrs
After initial
500 hrs
Inspect extension cord for damage
●
Check wheels, caster and wheel motors for build up; and clean
●
Inspect all safety devices (e-stop, backup beeper, seat switch)
●
Inspects for leaks (hoses and fittings)
●
Blow out fan cover on the bottom of the motor after each job
●
Grease front caster wheel
●
Check hydraulic oil level
●
●
Replace the spin-on hydraulic oil filter
●
●
Change hydraulic fluid
●
●
402228_5200QL_RevE
To
order
go
to
Discount-Equipment.com
