NARDA SRM-3006, Operating Manual

Page: 132 / 240

9 Level Recorder Mode
120
SRM-3006 Narda
9.2.1 Activating the beeper
Main Menu • Settings • Beep on new Maximum
A new maximum level can also be indicated by a beeper. To do this, you
must activate the
Beep on new Maximum
function in the main menu under
Settings
.
To activate the beeper:
⇒
See Editing device-specific settings on page 57 .
9.3 Basic settings
This section describes the basic settings. If these settings are identical in
more than one operating mode, a cross-reference will indicate the relevant
section in Chapter 6
Functions Common to More Than One Operating
Mode on page 69 where the setting is described.
9.3.1 Selecting the center frequency (Fcent)
Level Recorder • Fcent
1.
Press the
Fcent
softkey.
2.
Use the arrow keys to select a decimal digit and then change the
value using the rotary control.
3.
Press the
OK
key to set the value.
9.3.2 Setting the resolution bandwidth (RBW)
Level Recorder • RBW
⇒
See Setting the resolution bandwidth (RBW) on page 71 .
9.3.3 Setting the video bandwidth (VBW)
Level Recorder • RBW • VBW
⇒
See Setting the video bandwidth (VBW) on page 71 .