SignalShark User Manual
102
To change these parameters:
1.
Tap the toggle button to select
Hold
or
Stop
.
2.
Press the
Esc
key or tap the header to close the menu.
Setting the detectors (Detectors)
Here you can do the following:
•
Enable/disable the detectors
+Pk
,
RMS
,
Third Detector
(detector depends on
Third Detector
selection)
•
Select a third detector:
+Pk
;
Avg
,
Smp
•
Select which of these detectors is displayed in the waterfall diagram
To open the Detectors menu:
You selected the desired view.
1.
Tap the
Detectors
button.
The
Detectors
menu opens.
2.
Then you can do the following:
+Pk, RMS, Third Detector
Here you can switch the three detectors on / off.
To switch a detector on / off:
1.
Tap the detector to switch it
On
/
Off
.
2.
Press the
Esc
key to close the menu.
Third Detector
For
Third Detector
following detector types can be selected:
•
-Pk
•
Avg
•
Smp
To select the Third Detector:
1.
Tap the
Third Detector
button.
2.
Select a detector from the dropdown list.
3.
Press the
Esc
key twice to close the dropdown list and the menu.
Visible Detector
The
Visible Detector
is the detector that is displayed in the diagram.
To select the Visible Detector:
1.
Tap the
Visible Detector
button.
2.
Select a detector from the dropdown list (only the enabled detectors are shown in the
dropdown list).
3.
Press the
Esc
key twice to close the dropdown list.
