NARDA NBM-550, Operating Manual

Page: 65 / 156

5.5 Measuring in XYZ display mode
Narda NBM-550
55
Display overview
Changing the result type
Note:
You can only change the result type for the upper display
area.

Press the
Result Type
function key to select a different
result type (refer to
“Selecting the result type”
on
page 46 for information about result types).
1 Result type
Actual
displays the field strength in the
upper display area
2 Display of the RSS (root sum square) field strength
value calculated from the X, Y, and Z values (valid for
units V/m and A/m, linear addition for mW/cm
2
and
W/m
2
):
3 Graphic display of field strength showing the selected
field type (E-field in the example shown here)
4 Only the latest measured values for each axis can be
shown (result type
Actual
)
5 Measured values for the three axes
6 The
Result Type
function only applies to the upper
display area. The other functions are as for Normal
display mode (see
“Measuring in Normal display
mode”
on page 46).
1
3
4
5
2
6
RSS X
2
Y
2
Z
2
+ + =