NARDA nbm-520, Operating Manual

Page: 39 / 64

4.12 Switching off
Narda NBM-520
33
Example:
The NBM-520 is remotely controlled via the
NBM-550. On NBM-550, the result type
Average
with 6
min. averaging time was set. The measuring results are cor-
rectly displayed in V/m.
The NBM-520 simultaneously displays completely different
values because it was set to
MAXimum
and
W/m
2
. Both
displays are correct - there are no errors.
Note:
Normal remote control via NBM remote control
commands differs from the behavior described
above. All settings that are active in the instru-
ment and in the display will be shown then.
4.12 Switching off
To switch the instrument off
⇒
Press and hold down the
ON/OFF
button for about three
seconds.
ª
The instrument switches off.