NARDA IDA, Operating Manual, Page: 36 / 292

3 Connecting Up and Starting to Use the Device
28
IDA - 3106 Narda
Starting the charge cycle

The AC line voltage must be the same as the operating voltage of the AC
adapter / charger.
1.
Connect the AC adapter / charger to the charge socket of the IDA - 3106.
2.
Connect the AC adapter / charger to the AC line.

The charge cycle starts.

The
Charge LED glows red during the charge cycle
.

The AC adapter / charger switches to trickle charge mode
automatically and the
Charge LED
glows green when the charge
cycle is completed.
3.3.2 Changing the battery pack
CAUTION
Incorrect handling of the battery pack
Incorrect handling of the battery pack can result in damage to the
battery pack or in injury.
 Do not open, crush, or dismantle the battery pack.
 Do not drop the battery pack from a great height.
 Only recharge the battery packs in the way described in this operating
manual.

Do not expose the battery packs to very high temperatures for an
extended period of time either separately or inside the device.
 Do not leave a discharged battery pack in the device for an extended
period of time.

Do not store the battery pack for longer than six months without
recharging it in the meantime.
 Please also observe the safety instructions for handling batteries
starting on page 15