NARDA IDA, Operating Manual, Page: 220 / 292

12 Multi - Channel Power Mode
212
IDA - 3106 Narda
12.1 About Multi - Channel Power mode
Multi - Channel Power mode is especially suitable for obtaining a quick
overview of defined frequency bands and channels. You can freely define
up to 500 channels per multi-channel table, each with its own RBW and
editable name. Simultaneous display of minimum, maximum and average
values allows you to immediately distinguish between continuous and burst
signals.
12.2 Operating mode specific functions
THis section describes functions that are specific to this operating mode.
You can find information about the general settings and functions that are
present in several operating modes (such as Fcent, RBW / CBW, Reference
Level) in chapter 6
Common Functions
on page 89.
12.2.1 Selecting the display mode
Two display modes are available:
•
Table
(see page 215)
•
Bar Graph
(see page 218)
To switch the display mode:
1.
Press the
Display
softkey.
2.
Press the
Views
softkey.

The
Select View
window opens.
3.
Use the rotary control knob to highlight a view and press the
OK
key:
– Table
– Bar Graph

The selected view will be displayed.
NOTE:
Pressing the
ESC
key returns you to the top menu level in the measurement
screen. (Press the
MENU
key to return to the Main menu.)