NARDA IDA, Operating Manual, Page: 203 / 292

10.6 Saving measured values automatically
Narda IDA - 3106
195
3.
Press the
Start Time
softkey and enter the desired time. You can enter
the current time automatically by pressing the
Current Time
softkey.

The start date and time are displayed in the lower status line.
4.
Press the
Prog Start
softkey to activate the trigger function.

The message
Armed
is displayed on the screen. (If the start time
precedes the actual time, the trigger function starts immediately.)
The recording starts when the specified time has been reached and stops
when the Time Span has elapsed.
To deactivate the trigger function or break off recording:

Press the
Break
softkey.
10.6 Saving measured values automatically
Time Domain (Scope) • Trigger Menu
I⁄Q Analyzer • Trigger Menu
The Auto Save function allows you to save measured values automatically
when a trigger event occurs.
To save measured values automatically:
1.
Open the Trigger menu and select the desired trigger type.
2.
Press the
Auto Save
softkey.

The auto save function is active, the softkey label shows
On
.
3.
Press the
Arm
softkey.

The trigger function is active; the
Suspend Auto Save
softkey is
displayed.

The measurement is saved when the trigger event occurs and the
time specified by Time Span has elapsed.
To suspend auto saving:

Press the
Suspend Auto Save
softkey.