NARDA FieldMan, Quick Start Manual, Page: 34 / 112

4 Device settings
34
FieldMan Narda
E
N
4
Device settings
4.1 Setting types
On this device, a distinction is made between
Device settings
and
Measurement settings
.
4.1.1 Device settings
4.1.2 Measurement settings
4.1.3 Resetting settings
Device settings include all parameters that affect the general device behavior or the form
of the display, but do not affect the measurement itself. The device always remembers
the last used device settings, stores them on the SD card and loads them the next time
the device is started. Device settings, with the exception of
EXPERT SETTINGS
, are not
saved in a setup.
⇒
Detailed information about all device settings can be found in the instruction manual.
These include all parameters that influence a measurement. They are combined in the
SK2
softkey and are complemented by the settings under
EXPERT SETTINGS
. Only
measurement settings are used for saving and loading a setup.
⇒
Detailed information on all measurement settings can be found in the description of
the respective operating modes in the instruction manual.
Via
Factory Reset
both settings types can be reset to the factory default.
FieldMan_KBA.book Seite 34