NARDA 8718B, User Manual

Page: 39 / 137

38 Operating the Meter
Changing the Unit of Measure
To change the unit of measure that the meter is set for ...
1. Access the menu system by pressing the function key
that corresponds to the legend below MENU on the
bottom line of the display.
2. Press the number 5 on the keypad to select UNITS from
the First Menu Screen . A screen will appear that offers
the available units of measure for the probe in use.
3. Press the number key on the keypad that matches the
desired unit of measure. For example, pressing
1
selects mW/cm 2
as the unit of measure. This unit of
measure is available for all probes with a flat frequency
response.
4. The meter will automatically return to the measurement
screen. If you had accessed the menu system from the
Opening Menu Screen , you will return to that screen.
1 m W / c
2
m
2 W / m
2
6 V
2
/ m
2
3 V / m 7 p J / c m
3
F1 F2 F3 F4