PRP30
PORCELAIN REFLECTIVE RADIANT PANEL
INSTALLATION INSTRUCTIONS
W415-0520 / A / 05.30.07
3.
Finished side out, slide each of the side panels into
place along the side walls of the fi replace until they are
tight against the rear panel.
FIGURE 2
4.
Secure the side panels in place using the black self
drilling screws.
FIGURE 3
5.
Replace the logs, and close the glass door.
This kit includes:
PART #
DESCRIPTION
QTY
W090-0116 Rear
Panel
1
W090-0117 Side
Panel
2
W570-0006 Screws (black self drilling)
4
1.
As referenced in your instruction manual, open the
glass door & remove the logs.
2.
Remove the 2 screws on the rear wall of the fi rebox.
Place the rear panel against the back wall of the fi rebox
allowing the cut out section to rest on the log support
bracket. Secure the panel in place using the 2 screws
removed earlier.
FIGURE 1
FIGURE 1
FIGURE 2
FIGURE 3
