Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON L4M 0G8 Canada • 1(866)820-8686
• www.napoleonfireplaces.com
W415-1857 / 08.02.18
GI-RB3/4 Riser Kit Installation Instructions
1
2
GDIX4 Illustrated
1. Bend up the 2 tabs on each riser rail,
as shown below.
2. Using 2 screws (supplied), secure
the riser rails to the hearth using the
specified holes for your model.
3. Remove the 2 existing screws (1 per
side) from the appliance. Lower the
appliance onto the riser assembly,
and then reinstall the 2 screws.
Ref. Qty.
Description
1
2
9-14 x 1/2 screws
Hardware Included:
Flashing
Trim
note:
When the appliance is placed onto the
riser assembly, try to maintain a 1/4” space
between the back edge of the hearth and
rear face of the side of the appliance.
The flashing trim should sit flush with the
back edge of the hearth.
1
GDIX4
Rear Face
Hearth
Riser Rails
2
3
1/4”
Tabs
1
GDI/G/X3
Existing Screw
