W415-2165 / G / 08.15.18
EN
20
finishing
5.0 finishing
5.1 brick panel installation and removal
A.
Slide the panels into place and secure it using the 2 screws (supplied).
B.
Ensure the brick panels are positioned properly in the appliance and are not angled or sticking out
from the appliance.
C.
To remove the panels, remove the 2 screws.
23
0
2 screw location
• Power supply service must be completed prior to finishing to avoid reconstruction.
• Heat vents and air openings cannot be covered in any circumstances.
!
WARNING
Side View
Front View
