1
WI2081 12/13
The
ISV-REPT01
Wireless Repeater
module extends the transmission distance between the
ISV WAP
Wireless Ac-
cess Point
and wireless iSeeVideo cameras by regenerating digital data signals in your wireless network.
Installation
Install the
ISV-REPT01
on a wall outlet located half way between the
ISV WAP
and the iSeeVideo wireless camera. The
ISV-REPT01
will search for and automatically connect to the
ISV WAP
if within range. Power cycle the iSeeVideo camera
to start the connection process. The
REPEATER TO CAMERA LED
will turn on after the camera is successfully con-
nected to the
ISV-REPT01
.
Note:
If adding the
ISV-REPT01
to an existing installation, the camera must be using the
Napco default SSID. If the camera is locked down with a custom SSID, you must factory reset the camera (insert a paper
clip into camera
Reset
socket, and hold for 12 seconds). Optionally, after the camera is back on line, you can generate a
new custom SSID (lock) if desired.
Controls and Indicators: Front Panel
R
333 Bayview Avenue
Amityville, New York 11701
For Sales and Repairs, (800) 645-9445
For Technical Service, (800) 645-9440 or visit us at
http://tech.napcosecurity.com/
(Note: Technical Service is for security professionals only)
Publicly traded on NASDAQ Symbol: NSSC
© NAPCO 2013
POWER
LED
On Steady
(Green)
Power on.
Blinking
Start up process (15-20 seconds)
Off
No power.
WPS LED
Off
WPS feature is not in use.
(LED normally off)
REPEATER
TO
WAP
LED
On (Green)
Connected to WAP with Best signal
strength.
On (Amber)
Good / Normal signal strength.
On (Red)
Poor signal strength; relocate the unit*.
Off
ISV WAP
connection not established.
REPEATER
TO
CAMERA
LED
On (Green)
Connected to camera(s) with Best signal
strength.
On (Amber)
Good / Normal signal strength.
On (Red)
Poor signal strength; relocate the unit*.
Off
Camera connection not established.
LAN PORT
LED
On (Green)
LAN Port connected.
Off
LAN Port not connected.
Blinking
(Green)
Data being transmitted or received via
the LAN Port connection.
NAPCO iSeeVideo
ISV-REPT01
Installation Guide
