Napa Carlyle DTW12 User Manual Download Page 1

DTW38 and DTW12 

Rev. 02/27/15

DTW38, DTW12

3/8" Torque Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-100 ft.-lbs.
1/2" Torque Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25-250 ft.-lbs.
 

CW +/-2% CCW +/-2% of reading,

Torque Accuracy (*1)  . . . . . . . . . . . . . . . . . . . . . . . . . .10% to 100% of full scale
Angle Accuracy  . . . +/- 1% of r/- 1°, Angle Velocity 10°/sec ~180°/sec
Data Memory Values  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99
Operation Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Peak Hold/Track
Unit Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ft-lb, in-lb, N-m, & kg-cm
Head Type  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fixed
Gear teeth  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Audible Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Yes
Buttons. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
LED Indicator  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 LED's
Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 AA
Battery Life-Continuous Operation (*2)  . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Hrs
Battery Life-Standby (*2)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Year
Operating Temperature  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41ºF ~ 108ºF
Storage Temperature  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -4ºF ~ 122ºF
Humidity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Up to 90% non-condensing

SPECIFICATIONS

AlwAys reAd  
instructions 
before using 
tools 

AlwAys weAr  
sAfety 
goggles

not 
wAterproof

DTW38, DTW12

3/8", 1/2" Dr. Digital Torque Wrenches

WARNING

Summary of Contents for Carlyle DTW12





















Reviews: