Nanosurf easyScan 2 AFM, Operating Instructions Manual, Page: 144 / 164

Q
UICK
E
VALUATION
T
OOLS
144
line’s end point markers or the corner mark; it can be moved by dragging
the line’s centre markers.
Create Cross Section
Displays and can create a new measurement document containing a line
cross-section of a Color map or Line View display. The line is displayed in
the Tool Results panel. The line can be stored in a new measurement doc-
ument.
The line is defined by drawing an arrow. The arrow points toward the for-
ward direction of the line. The start of the arrow is defined by the mouse
cursor position where the left mouse button is clicked, the end of the arrow
by the position where the button is released. When the mouse is not moved
between clicking and releasing, an arrow ending in the centre of the meas-
urement is drawn. The direction of the arrow can be adjusted by dragging
its end markers; it can be moved by dragging the centre marker.
A new measurement document containing the line section is created by
double clicking the graph, or by clicking ‘Cut out line’ in the Tool Results
panel.