SEV-00184-01
nCounter Pro Analysis System User Manual
FOR RESEARCH USE ONLY. Not for use in diagnostic procedures.
99
Shutdown System
If the system needs to be shut down, it is preferable to use the shutdown system button on the
Maintenance Menu to power off the system before using the switch on the back of the Digital
Analyzer.
Cleaning
Prep Station
After a completed run, remove all consumables and waste.
Periodically, clean the stage surface and waste receptacles of the Prep Station by wiping with a
disinfectant followed by wiping with water or 70% ethanol. Avoid the electrode fixture. An RNase
removal agent such as RNase
Zap
® from Ambion® may also be used.
Clean the exterior periodically using a diluted neutral soap followed by water.
NOTE:
If it becomes necessary to wash the touchscreen, use a damp cloth to gently wipe
the surface. Do not use excessive water or other solvents, which may damage the screen.
Digital Analyzer
Clean the exterior periodically using a diluted neutral soap followed by water.
NOTE:
If it becomes necessary to wash the touchscreen, use a damp cloth to gently wipe
the surface. Do not use excessive water or other solvents, which may damage the screen.
Disposal of Electronic Equipment
This symbol on the nCounter Analysis System is required in accordance with the Waste
Electrical and Electronic Equipment (WEEE) Directive of the European Union. The
presence of this marking on the product indicates that:
•
The device was put on the European Market after August 13, 2005.
•
The device is not to be disposed via the municipal waste collection system of any member
state of the European Union.
IMPORTANT:
For products under the requirement of WEEE directive, please contact your
dealer or local NanoString office for the proper decontamination information and take
back program, which will facilitate the proper collection, treatment, recovery, recycling, and
safe disposal of the device.
Summary of Contents for nCounter Pro
Page 1: ......
