Owner’s Manual
720005-0000
November 2009
8
1.6 Testing the Printer
Run this test to check the printer. The test prints and cuts a resident test ticket. Verify this
ticket to judge the printing quality.
Figure 8: Sample Test Ticket
To print the test ticket, power-on the printer while pressing and holding the Paper Feed
Button for approximately 3 seconds. A test ticket similar to the one above will be printed
approximately 5 seconds after. Press the paper feed button once more and the ticket will
feed. Pressing the button again will result in blank tickets.
Model:
PAYCHECK 4
Firmware: PAY-2.51E
User Version:
S R.2.4.0
Protocol: TL
COMMUNICATION
Interface: Serial
Baud Rate:
9600
Data Bits:
8
Parity: NONE
Handshaking: PRT+RTS
Print mode:
TL
Back USB :
Fw Controlled
Aux Port:
Disabled
PRINT CONTROL
Print Method:
No HPQ
Speed: 175
mm/sec
Black Bar Index:
Right
No HPQ Burn Time:
275 us
Motor Current:
2
Real-Time Command:
Enabled
Auto Reset Status:
Enabled
PRINTER ENVIRONMENT CONDITIONS
Voltage: 24.0
Volts
Temperature: 19
Celcius
SYSTEM RESOURCES
FLASH -Used:
0
-Free:
65535
LIBRARY INVENTORY
Templates:
0,1,2,3,4,5,6,7,8,9,A,B
Print Regions:
1,2,3,4,5,6,7,8,h,9,A,B,C,D,E,F,G,I,J,K,L,N,O,P,Q,R,
S,T,U,Z,X,a,b,c,d,e,f,g,i,j,k,l,m,n,o,p,q,
Graphics: None
Fonts: 0,1,2,3,4,5,7,8,9,
A,B,E,P
MANUFACTURING INFORMATION
Printer ID:
DSP_PR1
Date Code:
20031104
PWM Setting: 7F7F7F7FFFFFFF
A to D: 03ba, 01da, 00e8, 03c8
Dip Switch Config (1234): 0000
Status: *S|0|PAY-2.51E|@|@|@|I|@|P|*
