Chapter 2. Preparation and Installation
HR8 Motor User Manual
2-2
2.1.1 Mounting
Base
Prepare the base as described in Section 3.3.3 - Mounting Base
Dimensions. The base should be positioned perpendicular to the
Ceramic driving plate that is bonded to the
stage.
If necessary, refer to the schematic for motor dimensions.
CAUTION:
The mounting base and the method used for mounting
should be designed for maximum mechanical rigidity and stiffness.
Stage Base
Stage Carriage
Mounting
Base
4x holes
Alumina Driving
Plate location
Figure 2-1: Motor Mounting Base
The mounting base dimensions diagram refers to the
front
surface
of the Ceramic driving plate.
For driving plate dimensions please refer to the price list.
The four screws securing the motor to the mounting surface will be
inserted from its underside. Any protrusion of the screws
might
interfere with motion on another axis.
