12
Installation and Connecting Cables
Preparation
Prepare a table which can bear a weight of about 50 kg and has a free area of 80 cm (width) x 50 cm
(depth).
Put the Monolith NT.115 instrument and the PC/notebook on this free area.
CAUTION
The weight of the Monolith NT.115 instrument is approx. 24 kg, do not move the
instrument alone (two persons required for transport/movement). If you move the instrument alone
it poses a risk of personal injury or damage to the instrument.
Connecting the power supply and the Monolith NT.115
Confirm that the power switch of the Monolith NT.115 instrument is off (power switch is at the back,
left of the instrument).
WARNING!
Only operate the Monolith NT.115 instrument with the external power supply provided
(SPU63-105, Sinpro Electronic Co Ltd or Ael60US12, XP Power LLC or GS90A12-P1M, MeanWell
or GS60A12-P1J, MeanWell). Only use the supplied cables and plugs. If not doing so, you risk
electric shock and fire.
Connect the external power supply to the electrical socket. Then connect the power supply to the
Monolith NT.115 instrument.
CAUTION
Ensure that the power plug of the external power supply is well accessible. The Monolith
NT.115 instrument has to be installed in a way that it does not hinder the access to the external
power supply and its power plug.
Connect the Monolith NT.115 instrument to the notebook by using the supplied network cable.
Switch on the Monolith NT.115 and the notebook.
