10
10
The instrument panel provides you with important information on the engine when it is in operation. Regularly check this
information when the engine is running.
2 ranges of instruments panels are available. Only the position and / or appearance of the instruments and / or the icons
vary depending on the type of panel. All panels are not composed of all these elements.
1. Revolution counter
2. Hour-meter/Voltmeter
3. Engine oil pressure
4. Coolant temperature
°C
40
60
80
100
120
°F
105
180
220
250
bar
0
1
2
3
4
5
0
20
40
60
80
psi
RPM x 100
10
04
0
30
20
5
35
15
25
4
3
2
1
Battery charge.
This warning light comes at ignition. If this warning light comes on while the engine is
running, this means there is a charging fault in the alternator.
Coolant temperature warning light.
This light comes on and an alarm goes off in the event of overheating
in the cooling system.
Engine oil pressure warning light.
This light comes on when the pressure in the lubrication system is too
low.
Pre-heating.
This light is on when the spark plugs are pre-heating the combustion chambers (if your engine
has these).
Water in the diesel fi lter warning light (optional).
This light comes on when there is too much water in
the diesel fi lter.
Ignition.
This light indicates that the ignition is on.
Operation of an engine equipped with an Eco4, A4, B4 or C4 panel:
To start the engine :
1.
Put the throttle in the neutral position.
2.
Put the key into the ON/STOP ignition.
3.
Turn the key a quarter turn to the right. All the warning lights will come on and it will make a sound signal. This
stage allows you to check that these elements are working properly. After a few moments, only the oil alert and battery
charge lights will remain on.
4.
Press the START button at halfway to start preheating.
Hold the button for 5 to 15 seconds
, depending on
ambient temperature, in order to let the engine preheat. Press fully to start the engine.
I
Warning !:
Never press the START button when the engine is running.
Stopping the engine:
Turn the key counter clockwise. The engine switches off and all the warning lights go out.
The operation of the ECO3, A3, B3 and C3 panels is explained in the user manual reference 970313180 that is also
delivered with the engine.
Instrument panel