© by N&W GLOBAL VENDING S.p.A.
23
11 2008 3275 00
STATiSTiCS
the machine operation data are stored in general and
relative counters that can be reset without losing total
data.
statIstIcs
print statistics
print relative statistics
Display statistics
Display relative statistics
Delete relative statistics
FIll> x.x
p
riNt
connect an rs232 serial printer having 9600 baud rate,
8 data bits, no parity, 1 stop bit with the serial port on the
button board in order to print all statistics, i.e.:
Total
1 - counter for every single selection;
2 - counter for bands;
3 - failure counter;
4 - coin mechanism data;
5 - photocell errors;
6 - motor errors.
7 - dispensing compartment lock errors
relative
1 - counter for every single selection;
2 - counter for bands;
3 - failure counter;
4 - coin mechanism data;
5 - photocell errors;
6 - motor errors.
7 - dispensing compartment lock errors
the data relative to the machine will be also printed, i.e.:
print date/time
-
machine name
-
software release
-
operator code
-
machine code
-
installation date.
-
to print, act as follows:
from the print function press the enter key
-
�
to display
“Do you confirm?”;
- connect the printer before confirming;
- press the enter key
�
to start printing
D
isplay
press the enter key
�
to sequence-display the data
described by the print statistics paragraph.
r
EsEt
rElativE
statistics
statistics can be reset for relative counters in a global
(all types of data) or selective way, i.e. for:
selections
-
failures
-
coin mechanism data
-
photocell errors
-
motor errors
-
dispensing compartment lock errors
-
to reset the statistics, act as follows:
From the function press the enter key
-
�
to display the
request “Do you confirm?” flashing on and off.
press the enter key
-
�
to reset the statistics; the "ex-
ecution" message will appear for some seconds and
the statistics will be reset.
iNDiViDuAL PriCE
Use this function to vary the sales price for every single
selection and for the promotional time band you may
have set up.
press key
�
to have direct access to the price-selection
combination of time band 0 if you have enabled the func-
tion in the "programming" menu.
