5.2 Application Endpoint #1 –Thermostat
Cluster
supported
Description
0x0000
server
Provides basic information about the device, such as the manufacturer ID,
vendor and model name, stack profile, ZCL version, production date,
hardware revision etc. Allows a factory reset of attributes, without the device
leaving the network.
Basic
0x0003
server
Allows to put the endpoint into identify mode. Useful for identifying/locating
devices and required for Finding & Binding.
Identify
0x0004
server
Groups
Allows adding this endpoint to one or more groups. Afterwards the endpoint
can be addressed using the group address. This is also a prerequisite for
scenes. You may also query group membership and delete group
associations.
0x0005
server
Scenes
Allows storing one or more scenes per group, where each scene consists of a
pre-set on/off state value. You may either store the current values as a
scene, or provide scene settings when adding a scene, or delete scenes.
0x0201
server
Thermostat
0x0702
server
Simple Meter
0x0b04
server
Electrical Measurement
Measuring power, voltage, current
0x0002
INT8U ,
read-only
StackVersion
0x0003
INT8U ,
read-only
HWVersion
Hardware version 1
0x0004
string,
read-only
ManufacturerName
“NAMRON AS”
0x0005
string,
read-only
ModelIdentifier
“4512737 & 4512738”
0x0006
string,
read-only
DateCode
NULL
0x0007
ENUM8,
read-only
PowerSource
Device power supply, fixed value 0x01 Mains (single phase)
0x0001
INT8U ,
read-only
ApplicationVersion
This is the firmware version number of the application
Attribute
Type
Description
0x0000
INT8U,
read-only
0x03
ZCLVersion
5.2.1 Basic -0x0000 (Server)
Attributes supported:
0x0406
client
Occupancy Sensing
0x000a
Server
Time
0x0204
server
Thermostat User Interface Configuration
0x0009
server
Alarm
Device related alarm