Page 48
COMMUNICATIONS OPTIONS
[DEFAULT IN GREEN]
LINK :
ON .......................................... (a)
LINK AS :
1 (LEFT)
COMMUNICATION MODE
ON .......................................... (b)
CPU ID
1 (LEFT) ................................. (c)
EXIT
SELECT SW :CHOOSE
ENTER SW : ENTER
(b) Communications Options
This item is set when the communication cable is connected. (This is an optional
extra).
1.
Select “COMMUNICATIONS OPTIONS” on the menu screen to set the
communication settings. The following screen is displayed.
2.
Use the Select Up/Down switch to choose the required item then press the
Enter button.
3.
Use the Select Up/Down switch to change the setting.
4.
Select “EXIT” and press the Enter button to return to the menu screen.
When setting the communication settings, set (b) “COMMUNICATION MODE” to ON
and (c) “CPU ID” to “1 (LEFT)” or “2 (RIGHT)” on each game respectively.
Note: Communication is not possible if “CPU ID” values are the same.
After setting the (a) and (b) settings on each game, select “EXIT” on both games. This
switches to the “NEGOTIATING screen” and synchronises communication.
Note:
Switch each game to “EXIT” within thirty seconds of each other.
If communication is not synchronized during the countdown (30 seconds), the
communication status will revert to “LINK OFF” and the communication
settings will not be set.
Summary of Contents for WORLD KICKS
Page 2: ...Page 2...
Page 3: ...Page 3 WORLD KICKS...
Page 80: ...Page 80 1 2 3 4 5 6 7 9 10 8 11 9 5 Header Assembly...
Page 85: ......
