NAMCO PAC-MAN SWIRL Operation Manual Download Page 43

Page: 43 / 125

Test Mode

Troubleshooting

5. Test mode

Replenishing Balls (MAINTENANCE MENU)

5-6-2 BALL SUPPLY

[Select MAIN MENU > MAINTENANCE > BALL SUPPLY.]

ＢＡＬＬ　ＳＵＰＰＬＹ

●ＢＡＬＬ　ＳＵＰＰＬＹ　　　　　ＯＦＦ

Press the UP/DOWN button to select BALL SUPPLY and press the ENTER button to rotate the

roulette.

Put the ball into any pocket.

Be sure to insert a ball after confirming that the previously inserted ball has been

lifted up in the INNER RAILs located at the center of the machine.

Be sure to insert the exact number of 26 balls. Otherwise, an error may occur.

INNER RAIL

Roulette

When three balls are set in the ball stock/release section for all stations, the roulette stop rotating.

REL RAIL (ball stock/release section)

Three balls

After replenishing work completes, press the BACK button to return to the MAINTENANCE

screen.

Summary of Contents for PAC-MAN SWIRL






























































































































Search results

Summary of Contents for PAC-MAN SWIRL

Reviews:

Related manuals for PAC-MAN SWIRL

Brands by name

Popular brands

NAMCO PAC-MAN SWIRL, Operation Manual

Search results

Summary of Contents for PAC-MAN SWIRL

Reviews:

Related manuals for PAC-MAN SWIRL

Brands by name

Popular brands