Page 61
7-8
Replacing the Trigger Switch
1.
Remove the gun cover and gun slide (R).
2.
Replace the microswitch. Take care when replacing the switch that the
correct wires are fitted to the correct terminals.
3.
Reassemble in reverse order.
Plunger
Solenoid
Spacers
Slide guide
E-ring
Solenoid bracket
Harness exit (downwards)
Microswitch
Blue wire.
Black wire.
8.
Reassemble in reverse order.
Note: When reassembling match the D-type hole of the solenoid bracket
to the D shape of the solenoid and ensure that the E ring and spacers
are in the correct positions.
9.
