Page 43
SELECT SW : CHOOSE
ENTER SW : ENTER
(a)
(b)
(c)
(d)
I/O PCB CHECK
GUN INITIALIZE
SWITCH TEST
LAMP & RECOIL TEST
EXIT
I/O TEST
A) I/O PCB Check
1.
Select I/O PCB CHECK on the I/O TEST screen and press the enter
button. The following screen is displayed.
SELECT SW : CHOOSE
ENTER SW : ENTER
I/O PCB : Connect OK
namco ltd.;JYU-PCB;Ver1.00;JPN,
1Coin 2Guns
EXIT
I/O TEST
I/O PCB CHECK
6-3-3 I/O Test
1.
Select I/O TEST on the menu screen to test the I/O PCB, Initialize the
Gun aiming, test the Switches and test the Lamps and Gun Recoil. The
following screen is displayed.
2.
Use the Select Up/Down switch to choose the required item then press
the Enter button to enter the test.
3.
Select EXIT and press the Enter button to return to the menu screen.
