Page 35
5-1 Fitting the Header Assembly
The fitting position of the Header Assembly is very high, and it is important
that a means of reaching the height safely , without stretching, is available
(e.g. steps, step stool etc.)
1.
Remove 4off security screw (M5x12) and remove the Top Cover.
2.
Fit the Header Base assy to the top of the Monitor Cabinet with 2off pozi
head screws (M6x16), with flat washers.
3.
Connect the connector and refit the Top Cover using the 4off security
screws (M5x12).
Security screw (M5x12)
Security screw (M5x12)
Top cover
Signboard Assy
Pozi head screw (M6 x 16)
