Page 49
6-2-4-4 Solenoid Test
1.
Use the Select Up/Down switch to choose “SOLENOID TEST” on the I/O
Test menu screen.
2.
The Gun Recoil Solenoid will operate and the display change from OFF to
ON each time the Enter button is pressed. Operating the Enter button again
will turn the Solenoid Off.
3.
Press both the Up Select switch and the Enter switch together to return to
the I/O Test Menu screen
I / O TEST
LINK : ON 1
I/O PCB CHECK
HOW
TO
[IF
INITIALIZE]
SWITCH
TEST
SOLENOID
TEST
OFF
EXIT
EXIT : UP SELECT SW + ENTER SW
