Page 72
Button head
(M4x6)
Gun Side (Left)
Connector
Grub Screw
(M4x6)
Button head
(M3x5)
Button head
(M3x5)
Cap screw
(M4x6)
Gun Motor
Earth Terminal
Recoil unit
6-11
Replacing the Gun Motor
1.
2.
Disconnect the connector.
3.
Remove 1off cap screw (M4x6) and disconnect the Earth Terminal.
4.
Remove 2off button head screws (M4x6) and remove the recoil unit.
5.
Slacken 1off grub screw (M4x6), remove 3off button head screws (M3x5) and
remove the Motor.
6.
Reassemble in reverse order.
Note: When reassembling ensure that the grub screwengages on the flat of the
motor shaft. If the cam surface is damaged, replace the cam.
Make sure that the recoil unit moves freely before closing the gun body.
Note: After replacing the Motor, be sure to conduct a motor test.
Summary of Contents for CRISIS ZONE DX
Page 83: ...Page 82 1 13 14 5 9 7 6 10 8 17 18 15 4 2 16 3 12 11...
Page 88: ......
