Page 35
WARNING
NEVER turn the power to the machine ON until installation
has been completed.
WARNING
In order to prevent possible electric shocks, be sure that the
machine is connected to the mains with a securely connected
earthed plug.
WARNING
So that customers are not injured , ensure that there is at
least 500mm separation between other machines or walls.
CAUTION
In order to avoid damage to the machine due to mis-operation,
ensure that the voltage of the mains supply is 230volts AC.
4. INSTALLATION
Notes on Installation
NOTE
If the location site of this machine has a polished floor, it is
recommended that rubber pads are fitted under the level
adjusters to prevent the machine sliding on the floor.
In order to gain access to the Power Supply and CPU
assemblies, make sure that the rear of the machine is
separated from a wall or other machine by at least 500mm.
When installation is complete, it is imperative that the
game is initialized.
Summary of Contents for CRISIS ZONE DX
Page 83: ...Page 82 1 13 14 5 9 7 6 10 8 17 18 15 4 2 16 3 12 11...
Page 88: ......
