NAMCO CASINO WINNER, Operator'S Manual

Page: 67 / 216

Page 67
6-6-4 I/O Test
1. Select “I/O” on the menu screen and press the Enter switch. The following
screen is displayed.
2. Operate the Select switch Up or Down to select an item. The selected item
is displayed in red.
3. Press the Enter switch to confirm selection.
4. After the item has been selected, use the Select switch to change the
setting.
5. After the setting has been changed, press the Enter switch. The screen
returns to the item selection mode.
6. Select “EXIT” and press the Enter switch to return to the Menu screen.
(a) Input/Output Test
(b) This test is for testing switches and sensors (see 6-6-5 page 76)
(c) Measurment of field payout (see 6-6-6 page 77)
(d) For testing the Andon Assy operation (see 6-6-7 page 80)
Note: No selections can be made while “WAIT”, displayed in the upper left of the
screen, is showing. Wait until this indication has gone off.
SELECT SW:CHOOSE ENTER SW:ENTER
I/O TEST MENU
(a)
(b)
(c)
(d)
I/O TEST
SWITCH TEST
FIELD P/O MEASUREMENT MODE
ANDON MEASUREMENT MODE
EXIT