NAMCO CASINO WINNER, Operator'S Manual

Page: 41 / 216

Page 41
4-1 Notes on Installation
NEVER turn the power to the machine ON until installation has been
completed
In order to prevent possible electric shocks, be sure that the machine is
connected to the mains supply with a securely connected earthed plug.
So that customers are not injured, ensure that there is at least 500mm
separation between other machines or walls.
In order to avoid damage to the machine due to mis-operation, ensure that the
voltage of the mains supply is 230volts AC.
NOTE
•
If the location site of this machine has a polished floor, it is
recommended that rubber pads are fitted under the level asdjusters to
prevent the machine sliding on the floor.
•
In order to gain access to the Power Supply and CPU assemblies,
ensure that the rear of the machine is separated from a wall or other
machine by at least 500mm
4-2 Lowering the Level Adjusters
When the game is in it’s final position, lower the four (4) level adjusters with a spanner,
so that all castors are raised from the floor by 1~2mm. Tighten the lock nuts with a
spanner to ensure that the Level Adjusters do not move.
Level adjuster
Castor
Approx. 1~2mm
Lock Nut