Page 151
8-9-2
Replacing the Coin Sensors
The following describes the procedure for removing and reassembling the Coin
Sensor (R) Assy. Follow the same procedures for the removal and reassembly of
the Coin Sensor (L) Assy.
1.
Switch the power to the machine OFF.
2.
Remove the Coin Selector.
3.
Remove 2off cap screws (M4x12), disconnect the 3way connector (red and
white), and remove the twin sensor holder.
Note:
The Coin Sensor Connectors are colour coded in red and white.
When reassembling, connect the red connector to the coin slot side,
and the white connector to the coin outlet side.
4.
Remove 2off cap screws (M4x10), and remove the Coin Sensors.
5.
Reassemble in reverse order.
Coin outlet side
Coin slot side
Twin sensor holder
3-pin connector (red)
3-pin connector (white)
Cap screw
(M4 x 12) x 2
Coin sensor R1
(Coin sensor L1)
Coin sensor R2
(Coin sensor L2)
Cap screws
(M4 x 10)
Summary of Contents for CASINO WINNER
