57
OTHER COMPONENTS
31.3
Switching the lights on and off
WARNING
Risk of accident and injury!
Riding with inadequate lighting or without any lighting at all makes it difficult
for other road users to see you and prevents you from recognising dangers (e.g.
obstacles).
»
Turn on the lights before riding in low visibility (e.g. fog, dusk) or in the dark.
WARNING
Risk of accident and injury!
If you become distracted when switching on the lights while riding, there is an
increased risk of accident and injury.
»
Turn on the lights before starting your journey or stop to turn on the lights.
WARNING
Risk of accident and injury!
If the beam of light from the head lamp is too high, it may dazzle oncoming road
users. There is a risk of accident and injury.
»
Direct the headlight away from oncoming road users so that they are not dazzled
by the light.
Side wall dynamo-powered lighting
• The lighting is activated by pressing the pressure point on the dynamo from above so
that the dynamo rests against the side of the wheel.
• The lighting is deactivated by pushing the dynamo away from the edge of the wheel
back to its original position.
Hub dynamo light or light with separate battery
• The lighting is activated by setting the on/off switch to position I (ON).
• The lighting is deactivated by setting the on/off switch to position II (OFF).
Summary of Contents for HILL BILL 20" 2022
Page 68: ......
