Installation Guide
X-Last Bollards
Option 1 - Concrete in root
Excavate or core drill a minimum foundation size of:
Solid Ground
Bollard di 100mm x 205mm deep
Loose Ground
600 x 600 x 400mm deep
IMPORTANT
Do not allow concrete
to enter the bollard.
Add a sand bedding for bollard to sit on.
Place bollard centrally in foundation and pour ST4
concrete, using a level ensure bollard is vertical. Allow
enough depth for any finishing surface.
Ensure the top of the ring is flush with finished surface
level.
Option 2 - Bolt down flange plate
Use M16 bolts for bolting down to good concrete base.
Length of bolt is dependent on ground conditions.
Sand
205m
m
Bollard dia.
+ 100mm
Top of ring flush
with surface level
ST4 Concrete
50m
m
50m
m
