![NAL RESEARCH CORPORATION SHOUT 3G User Manual Download Page 63](http://html2.mh-extra.com/html/nal-research-corporation/shout-3g/shout-3g_user-manual_3149085063.webp)
SHOUT 3G User Guide Version B
Document Number: 451-93218-002B
63 of 69
A
PPENDIX
B:
U
PGRADING THE
F
IRMWARE
The SHOUT 3G firmware can be upgraded using a PC connected to the USB port of the device.
The device drivers support Windows XP, Windows 7, and Windows 10.
To upgrade the firmware:
1.
Run the NAL USB Firmware Loader program provided as part of the firmware download
from the NAL Research website
https://www.nalresearch.com/support/documentation-downloads/
Figure 29: NAL USB Firmware Loader Program
2.
With a USB cable attached to a computer and the device, press
Start Flash Mode
.
3.
Wait until it activates and then press
Browse
.
4.
Browse and select a valid NAL device BIN file.
Note:
NAL Research makes the BIN file available upon request.
5.
Once the BIN file is loaded, press
Program
.
Wait for the programming to complete. A message box pops up, indicating the loading
is complete. The new firmware is now loaded on the device. It may take a few
moments for the memory to initialize after the upgrade.