Quicksilver QS-100 User Guide – Revision C
Document Number: 451-19004-001C
28 of 74
4.5
F
IRMWARE
(A
DMIN
O
NLY
)
The Firmware page displays the current firmware version information and allows updating both
the product firmware and the Iridium 9770 transceiver firmware. There are two tabs on
Firmware page, one tab for the Product Firmware update, and the other tab for the 9770
transceiver firmware update.
4.5.1
P
RODUCT
The Update Log on the Product Firmware page displays a history of the initial firmware as well
as any updates applied to it. The following are the types of firmware update statuses:
initial - Only for the first entry.
started - The update was started but did not finish.
success - The update was successful.
partial - The update made changes, but was not successful.
failed - The update was not successful and did not make any changes.
Figure 20: Product Firmware Update Page
Stage a valid Quicksilver terminal firmware image provided by NAL before updating the
firmware.
1.
Click Upload.
2.
After the image stages successfully, click Start Update to start the firmware update.