A3LA-R-MIL-MOD User Guide Version B
Document Number: 451-93156-001A
62 of 159
<total1>: total number of message locations in <mem1>
<used2>: number of messages currently in <mem2>
<total2>: total number of message locations in <mem2>
<used3>: number of messages currently in <mem3>
<total3>: total number of message locations in <mem3>
Read Command: +CPMS?
Read command returns the current storage selected, usage and capacity. Response is
in the form:
+CPMS:
<mem1>,<used1>,<total1>,<mem2>,<used2>,<total2>,<mem3>,<used3>,
<total3>
Test Command: +CPMS=?
Test command returns lists of memory storages supported by the A3LA-R. Response
is in the form:
+CPMS: (list of supported <mem1>s),(list of supported <mem2>s), (list of
supported <mem3>s)
B.50 +CREG
–
N
ETWORK
R
EGISTRATION
Set Command: +CREG=[<n>]
Set command controls the presentation of an unsolicited result code +CREG: <stat>
when <n>=1 and there is a change in the A3LA-R network registration status, or code
+CREG: <stat>[,<lac>,<ci>] when <n>=2 and there is a change in the registration status
of the A3LA-R.
Valid values for <n> are:
0
disable network registration unsolicited result code (default)
1
enable network registration unsolicited result code +CREG: <stat>
2
enable network registration and location information unsolicited result
code +CREG: <stat>[,<lac>,<ci>]. <lac> indicates the location area code in
string format; <ci> is in the cell identifier which is not applicable to
IRIDIUM.
