A3LA-R-MIL-MOD User Guide Version B
Document Number: 451-93156-001A
56 of 159
0
Buffer of unsolicited result codes defined within this command is flushed
to the DTE when <mode> 1...3 is entered (OK response is returned before
flushing the codes). (default)
1
Buffer of unsolicited result codes defined within this command is cleared
when <mode> 1...3 is entered.
Read Command: +CNMI?
Read command returns the current settings for the SMS message indication.
Response is in the form:
+CNMI: <mode>,<mt>,<bm>,<ds>,<bfr>
Test Command: +CNMI=?
Test command returns the supported settings of the A3LA-R. Response is in the form:
+CNMI: (list of supported <mode>s),(list of supported <mt>s),(list of supported
<bm>s),(list of supported <ds>s),(list of supported <bfr>s)
B.43 +COPS
–
O
PERATOR
S
ELECT
Set Command: +COPS=[<mode>[,<format>[,<oper>]]]
Set command forces an attempt to manually register the A3LA-R to the network. Only
IRIDIUM as <oper> is supported.
Valid values for the parameters are outlined below.
<mode>:
0
automatic (<oper> field is ignored) (default)
1
manual (<oper> field is optional)
<format>:
0
long format alphanumeric <oper>
1
short format alphanumeric <oper>
2
numeric <oper>
<oper> is of string type enclosed by quotes“”; for example “IRIDIUM”. <format>
indicates if the format is alphanumeric or numeric; long alphanumeric format can be
up to 16 characters long and short format up to 8 characters; numeric format is the
Location Area Identification number which consists of a three BCD (Binary Coded
