Nakayama 034278, Manual

Page: 7 / 13

EN
WWW.NAKAYAMATOOLS.COM
7
Rated Voltage: 230V~ 50Hz
Rated Power: 550W
No-Load Speed: 8800/min
Cutting Width: 320mm
Line Type: 2x1. 6 mm
Line Feed System: Auto-feed
Technical Data
In keeping with our policy of continuous improvement, we reserve the right to change the design and configuration of any product without notice. Thus, the
text and images of this manual and packaging are for illustrative purposes only and may not under any circumstances be the basis for a legal claim or another.
Protection of the environment
To act for the protection of the environment, we recommend taking consider the following.
• Take care of your grass trimmer regularly and replace damaged parts.
• When your device is end of life, return it to your dealer for recycling
Waste Disposal
According to the European Directive on the disposal of waste electrical and electronic equipment, power tools that are no longer usable must be collected
and follow a path of appropriate recycling. Do not dispose of electric tools together with household waste.
Troubleshooting
Malfunction Probable cause Troubleshooting
The unit does not start/not work There is no current Check the condition of the cord or plug. If they
are damaged, replace them
The switch is faulty or defective Please contact your local dealer
The carbon is worn or motor failure Please contact your local dealer
The machine is cutting poorly The wire is not long enough
The spool is empty.
Manually out of the wire from the spool
Please contact your local dealer
Strong vibrations of the machine The motor shaft has been bent into contact with
a stone
Please contact your local dealer
The tool stops or operates intermittently The power cord or extension cord is damaged. Replace the extension cord and / or contact your
Nakayama dealer
* The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless these changes significantly affect the performance and safety of the
products. The parts described / illustrated in the pages of the manual that you hold in your hands may also concern other models of the manufacturer’s product line with similar features and may not be
included in the product you just acquired.
* Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our warranty will be voided if the machine is used in commercial, trade or industrial businesses
or for equivalent purposes.
* To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or replacement work, including maintenance and special adjustments, must only be carried out by
technicians of the authorized service department of the manufacturer.