18
11.8 Floor Protectors
11.6 n-SUB Connection Panel
mains
input
speaker
level inputs
RC5 in
RC5 out
Ch 1 left in
Ch 2 right in
mono in
mono out
earth switch
external earth
data RS232 in/out
Note:
The RS232 sockets
enable connection to custom
install RS232 controllers.
Please contact your dealer for
the appropriate connection
cables. These sockets are not
intended for direct connection
to computer networks.
n-SUB Specification
Inputs
2 x line level, 1 x speaker level
Frequency Response:
20Hz - 250Hz
Power Output:
350 Watts
Dimensions (H x W x D):
385 x 385 x 393mm
Weight (unpacked):
29.6kg
Finishes:
Cherry, Maple, Black Lacquer
Mains Supply:
100-120V or 220-240V, 50/60Hz
Naim Floor Protectors can be
used to if the n-SUB is to be
installed on a non-carpeted floor.
n-SUB
11.7 n-SUB Control Panel
11.9 n-SUB Cable Clamp
25mm
from side
180mm
from
back
193mm
from side
Fit the supplied Cable Clamp as
appropriate in one of the three
positions shown by the cross-
hatched squares .
